Indicator And Warning Lights; Turn Signal Indicator Light; High Beam Indicator Light; Fuel Level Warning Light - Yamaha NEO'S 4 2008 Owner's Manual

Indicator and warning lights

1. Coolant temperature warning light "

2. High beam indicator light "

3. Turn signal indicator light "

4. Fuel level warning light "

5. Engine trouble warning light "

Turn signal indicator light "
This indicator light flashes when the
turn signal switch is pushed to the left
or right.
High beam indicator light "
This indicator light comes on when
the high beam of the headlight is swit-
ched on.
INSTRUMENT AND CONTROL FUNCTIONS
EAU11003
Fuel level warning light "
This warning light comes on when the
fuel level drops below approximately
0.9 L (0.24 US gal, 0.20 Imp.gal)
When this occurs, refuel as soon as
possible.
The electrical circuit of the warning
light can be checked by turning the
key to "ON".
If the warning light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical
circuit.
"
"
"
Coolant temperature warning light
"
" "
"
This warning light comes on if the
EAU11020
engine overheats. If this occurs, stop
"
the engine immediately and allow the
engine to cool.
The electrical circuit of the warning
light can be checked by turning the
key to "ON".
EAU11080
" If the warning light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical
circuit.
EAU11350
" NOTICE
Do not continue to operate the
engine if it is overheating.
TIP
G
Engine trouble warning light "
This warning light flashes or stays on
if an electrical circuit monitoring the
engine is not working correctly. If this
occurs, have a Yamaha dealer check
EAU11442
the self-diagnosis system.
The electrical circuit of the warning
light can be checked by turning the
key to "ON". If the warning light does
not come on for a few seconds, then
go off, have a Yamaha dealer check
the electrical circuit.
3-2
If the engine overheats, see page
6-31 for further instructions.
ECA10021
3
EAUT1932
"