ENGINE REMOVAL
YP******
ENGINE REMOUNTING
When remounting the engine, reverse the re-
moval procedure in job instruction chart.
Note the following points:
1. Install:
S Engine 1
S Plane washer 2
S Rod 3
NOTE:
Temporarily install the rod and engine, and then
tighten the bolts and nuts to specifications.
2. Tighten:
S Bolt 1
S Self locknut (engine and swingarm) 2
32 Nm (3.2 mSkg)
4-4
ENG
64 Nm (6.4 mSkg)