Accessories; Usage Of External Usb Devices; Connection; Connecting To Tv And Terrestrial Antenna - Strong SRT 5302 User Manual

1.4 Accessories

1 user manual
„ „
1 remote control
„ „
2x batteries (AAA type)
„ „
NoTE:

1.5 Usage of external USB devices

It is recommended to use USB 1.1 or 2.0 storage devices. If your device is not
„ „
compatible to USB 1.1 or 2.0 specifications, playback and other multimedia functions
of the receiver would not work properly.
STRONG cannot guarantee compatibility with all types of USB storage devices.
„ „
If you are going to use external USB HDD (Hard Disk Drive) please consider
„ „
that the power specifications might exceed the supported output of your receiver
(5 V/500 mA). If so, please connect your USB HDD to an according external power
adapter.
It is advised not to store important information on USB storage devices used with
„ „
the receiver. Always make backups of data on USB storage device before usage
with receiver. STRONG will not take responsibility for any loss of information or
circumstances caused by loss of information.

2.0 CoNNECTIoN

2.1 Connecting to Tv and Terrestrial Antenna

To receive broadcasted signals, the terrestrial antenna cable should be connected to the ANT IN
connector at the back of the receiver.

2.2 Connecting to a Digital Audio Amplifier

Connect your Digital Audio Amplifier with the S/PDIF connector on the back of the receiver.

3.0 YoUR RECEIvER

3.1 front Panel

1. USB

3.2 Rear Panel

4
The batteries should not be recharged, disassembled, electrically short-
circuited or be mixed or used with other types of batteries.
If rechargeable accumulators instead of batteries are going to be used, we
recommend using (e.g. NiMH) types with low self-discharge to ensure long
time operation of remote control.
Connects to USB device
PART 1 • English
Fig. 1
Fig. 1
Fig. 2
Fig. 3