Connection; Connecting To A Terrestrial Antenna; Connecting To Tv With Hdmi Cable; Connecting To Tv With Scart Cable - Strong SRT 8113 User Manual

PART 1 • English
23. EPg
24. 1
25. TImEshIfT/2
26. 3
27. 4
28. Zoom
29. AsPECT
30. v-foRmAT
31. TImER
32. Coloured buttons Multimedia and Teletext functions

3.0 ConnECTIon

3.1 Connecting to a Terrestrial Antenna

To receive broadcast signal, your terrestrial indoor antenna must be connected to the ANT IN
connector on the back of the receiver.
The ANT OUT connector allows you to loop the antenna signal to a second receiver or TV set.
noTE:

3.2 Connecting to Tv with hdmI cable

The TV set shall be connected with the receiver using a good quality HDMI cable. This connection
gives the highest possible quality.

3.3 Connecting to Tv with sCART cable

SRT 8113 is also equipped with a SCART connector; alternatively, the TV set can be connected to the
receiver using a good quality SCART cable.

3.4 Connecting to a digital Audio Amplifier with s/PdIf

By connecting your receiver to a digital amplifier or home theatre system, you can enjoy the best
possible sound quality and multi-channel audio (depending on broadcast). Connect your Digital
Audio Amplifier or home theatre system with a suitable cinch cable to the S/PDIF connector on the
back of the receiver.
Shows the EPG (Electronic Programme Guide) in TV mode
Menu On: Activates the highlighted menu item.
Start playback from selected file or resume Timeshift
Start Timeshift mode or pause
Stop of playback
Start Records the TV programme to the connected storage device
To zoom in to the video on screen
Change aspect modes: 4:3 LB, 4:3PS, 16:9 and to Auto.
Change video resolution modes: 480i up to 1080p
Call directly Timer menu to view or set timers
If the signals at your location are too weak to receive proper signals with the
included indoor antenna, we recommend using an outdoor antenna which
can be pointed to transmission tower. Ask your local dealer for more advice.
Fig. 4
Fig. 4
Fig. 4
Fig. 5
5