Connection; Connecting To Tv And Terrestrial Antenna; Connecting To A Digital Audio Amplifier; Your Receiver - Strong SRT 5001 ECO User Manual

2.0 COnnECTIOn

2.1 Connecting to Tv and Terrestrial Antenna

To receive the broadcast signal, the terrestrial antenna cable should be connected
to the ANT IN connector at the back of the receiver. (Fig. 1)

2.2 Connecting to a Digital Audio Amplifier

Connect your Digital Audio Amplifier with the S/PDIF connector on the back of the
receiver (Fig. 2).

3.0 YOUR RECEIvER

3.1 front Panel

3.2 Rear Panel

1. AnT In
2. TO Tv
3. S/PDIf (Coax.) To connect your receiver to digital audio amplifier.
4. USb
5. Tv SCART To connect your receiver with your TV set using a
6. Power Cord Your receiver requires a voltage of 220 – 240 V AC (Auto-

3.3 Remote Control

1.
2. InfO
3. SUbTITlE Shows list of subtitle languages
4.
5. Ch+/Ch-
6. RECAll
7. vOl+/vOl- Volume up/down
8. mEnU
6
To connect an antenna for reception of broadcasting signal.
To connect a TV set or to connect an extra receiver.
To connect an USB device.
SCART cable.
selectable), 50/60 Hz ± 5 %. Make sure to check the power
specification before connecting your receiver to the
wall outlet.
Turns the receiver On/Standby
Shows the actual channel information
Mutes audio output of the receiver
Channel up/down
Back to previous shown channel
Opens the main menu/In menu you will get one step back
PART 1 • English
Fig. 3
Fig. 4
Fig. 5