Updating Software - Docomo f-01c Instruction Manual

Support

Updating software

This function allows you to connect the network and check if
software in the FOMA terminal needs to be updated, if software
update is necessary, download a part of software using packet
communication and update the software.
When software update is required, information is posted in "お客
様サポート (user support)" on NTT DOCOMO website or iMenu (in
Japanese only). Software may be updated in 3 methods: "Auto-
update", "Immediate update" and "Reserved update".
* Software update can be done even when various data, such as a
phonebook registered in FOMA terminal, camera images, downloaded
data, are remaining; note that data protection sometimes cannot be
secured according to the conditions of your FOMA terminal (such as
malfunction, damage, or water leak). DOCOMO recommends backing up
necessary data. However some data such as downloaded data may not be
backed up.
✜
When updating software
･
Do not remove the battery pack while updating software. The
update may fail.
･
Software update should be done with battery fully charged.
･
Software update (downloading or rewriting) may take time.
･
Making/Receiving calls, communications functions and other
functions are disabled during software update (Only incoming voice
calls can be answered while downloading.).
･
It is recommended that software update be executed in good radio
wave conditions with three bars of the antenna icon displayed and
the terminal not moved. If radio wave conditions become weaker
during software download or the download is stopped, retry
software update in a place with strong radio wave conditions.
･
When updating software, your private information concerning
FOMA terminal (model, serial number, etc.) is automatically sent to
the server (the server for software update managed by DOCOMO).
DOCOMO does not use the sent information for purposes except
software update.
･
When software update has failed, "Rewrite failed" appears and all
operation becomes unavailable. In that case, please bring the FOMA
terminal to DOCOMO-specified repair office.
Set auto-update
(Default : Auto-update)
Select automatic update of software or alert notification of the
necessity of update.
a meh Settingei Other settingee Software
updateeAuthenticatee"Set auto-update"eSet
required itemseC [Set]
When "Set auto-update" is set and update is required, the
update file is automatically downloaded, and
notice icon) appears on the stand-by display. Select the icon to
confirm or change the start time of update.
When "Only notification" is set and update is required,
(update notification icon) appears.
(rewrite
83