Docomo f-01c Instruction Manual page 77

Setting Access point (APN)
Set an access point to use for external connection in Access point
mode.
a mef Toolei Wi-Fieb Access point modeeb
Access points (APN)
b I [New]eSet required itemseC [Save]
c
Select an access point (APN)eC [Save]
Point
･
By default, mopera and mopera U are registered and "mopera U 128k" is
set as the access point (APN).
Setting access point
mef Toolei Wi-Fieb Access point modeea
a
AP mode ONe"Yes"
By default, a confirmation screen for using access point mode
appears when AP mode ON is set.
b
Set connection on the Wi-Fi device
Register the ESSID set in the FOMA terminal to Wi-Fi device.
For operation, see the instruction manual of the Wi-Fi device.
Enter the same security key as one of Authentication type in
Access point settings. If you set MAC address filter, MAC
address on the Wi-Fi device should be registered in advance.
c
Connect the FOMA terminal and Wi-Fi device
Client mode
With connecting the access point for small scale network such as
home network or Public wireless LAN service as a client, you can
view websites or download/upload data in high-speed.
Setting a new network
Register access point information to the FOMA terminal.
･ For settings on access point or necessary information for
registration, see the instruction manual of the access point etc.
a mef Toolei Wi-Fiea Client modeec
Network setting
b
Select a method for registering access point in the
FOMA terminal
Point
･
When entry of WEP key or PSK key is required, enter the security key set
to the access point.
Connecting access point
Set Wi-Fi mode to ON to search registered access point and
connect it. Start Full browser to use Internet via Wi-Fi.
a mef Toolei Wi-Fiea Client modeea Wi-Fi
mode ONe"Yes"
75