Connecting To A Wi-Fi Compatible Pc - Docomo f-01c Instruction Manual

Connecting to a Wi-Fi compatible PC

Even out of public wireless LAN area, you can perform packet communication with
connecting a Wi-Fi compatible PC to use FOMA terminal as an access point.
･
Switch FOMA terminal to an access point mode in advance. For access point mode settings, refer to
"Instruction manual (detailed version) (in Japanese only)" (PDF file) of the FOMA terminal.
<Example> Under Windows 7
1
Click (Start)→"コントロールパネル (Control panel)"→"ネットワークの状態
とタスクの表示 (Network status and tasks)" in the "ネットワークとインター
ネット (Network and Internet)" category.
Under Windows Vista
Click (Start)→"接続先 (Dialup connection)".
2
Click "新しい接続またはネットワークのセットアップ (Setup new connection
or network)".
Under Windows Vista
Click "接続またはネットワークをセットアップします (Set up connection or network)".
3
Select "ワイヤレスネットワークに手動で接続します (Connect to Wireless
network manually)" and click "次へ (Next)".
･
To make wireless connection for the first time, on the "ワイヤレスネットワークに手動で接続します
(Connect to wireless network manually)" screen, change ワイヤレスアダプタ (Wireless adapter) to
"ワイヤレスネットワーク接続 (Wireless network connection)" and click "次へ (Next)".
4
Enter network information and click "次へ (Next)".
･
Set it to the same as "無線設定 (Wireless settings)" of the FOMA terminal.
- ネットワーク名 (Network name) : Enter the ESSID set for the FOMA terminal.
- セキュリティの種類 (Security type), 暗号化の種類 (Encryption type) : Set "認証方式
(Authentication method)" information in the FOMA terminal. In "認証方式 (Authentication
method)", it is described in the format combining "セキュリティの種類" and "暗号化の種類"
settings. Select a corresponding setting. "パーソナル (Personal)" in "セキュリティの種類
(Security type)" is the same meaning as "PSK".
- セキュリティキー (Security key) (For Windows Vista, "セキュリティキーまたはパスフレーズ
(Security key or pass phrase)" : Enter WEP key or PSK key.
5
Click "閉じる (Close)".
■ To re-execute communication via Wi-Fi connection after disconnection
Under Windows 7
(Start)→"コントロールパネル (Control panel)"→"ネットワークの状態とタスクの表示 (Network status
and tasks)" in the "ネットワークとインターネット (Network and Internet)" category→On the "ネットワー
クと共有センター (Network and sharing center)" screen, "ネットワークに接続 (Connect to network)"→
Click a connection name on the screen→Click "接続 (Connect)".
Under Windows Vista
(Start)→"接続先 (Connection point)"→Select a connection point and click "接続 (Connect)".
28