Docomo f-01c Instruction Manual page 125

❖
Setting the dialup connection (APN)
<Example> Setting under Windows XP
1
Click "スタート (Start)"→Select "すべてのプログラム (All programs)"→"アク
セサリ (Accessories)"→"通信 (Communication)" and click "ハイパーターミナ
ル (Hyper terminal)".
2
Enter the desired dialup connection name in "名前 (Name)"→Click "OK".
･
The following characters (one-byte) cannot be
used in "名前 (Name)".
￥/:＊?<>｜"
3
Enter a fictional phone number (such as "0") for "電話番号 (Phone number)"
→Select "接続方法 (Connection method)"→Click "OK".
･
"市外局番 (Area code)" differs depending on the
PC environment. The code does not relate to
Dialup connection (APN) setup. So no need to
change.
･
Set as follows at "接続方法 (Connection method)"
field.
For USB cable connection : Select "FOMA F01C".
For Bluetooth connection : Select "ご使用の
Bluetoothリンク経由標準モデム (Standard
modem via Bluetooth link you use)" or
"Bluetooth機器メーカが提供しているBluetooth
モデム (Bluetooth modem provided by
Bluetooth device manufacturer)".
4
Click "キャンセル (Cancel)" on the "接続 (Connect)" screen.
5
Enter the dialup connection (APN) in the format "AT+CGDCONT =<cid>,
"<PDP_TYPE>", "<APN>""→
<cid> : Enter any number between 5-10.
<PDP_TYPE> : IP or PPP
<APN> : Dialup connection (APN)
･
+CGDCONT command→P36 "Supplement to AT
command"
･
If nothing is displayed even when AT command is
entered, enter ATE1 and press .
19