Waterproof/Dustproof Function - Docomo f-01c Instruction Manual

Waterproof/Dustproof function

F-01C provides waterproofness of IPX5 (former JIS protection code
*1 *2
5) , IPX8 and dustproofness of IP5X (JIS protection code 5)
firmly closing the external connection jack cap and HDMI connection
jack cap and installing the back cover in a locked state.
*1 IPX5 means that a phone keeps functioning after applying a jet flow of 12.5
L/min. from every direction from a distance of approximately 3 m for at
least 3 minutes using water nozzle in 6.3 mm inner diameter.
*2 For F-01C, IPX8 means that a phone keeps functioning after F-01C is slowly
submerged to depth of 1.5m in static tap water at room temperature, left
there for 30 minutes and then taken out, and the mobile phone keeps
shooting still images or moving pictures in approximately 30 minutes in
static tap water at room temperature.
*3 IP5X means a protection degree that a phone keeps functioning and safety
after it is placed in a device with dust in diameter 75μ or less for 8 hours,
agitated and then taken out.
18
✜
What you can do with waterproofness/dustproofness
*3
with
of F-01C
・ You can talk or watch 1Seg programs without using an umbrella in
the rain (for rainfall of 20 mm or less per hour).
- When your hands or FOMA terminal are wet, avoid installing/
removing the back cover or opening/closing the external
connection jack cap.
You can also shoot still images and moving pictures in the pool
・
depth of 1.5 m.
- Do not perform other operations underwater than shooting still
images and moving pictures.
- If you put the terminal in water of swimming pool, be sure to have
it within 30 minutes.
- If FOMA terminal gets wet with water from the swimming pool,
wash it in specified procedure (⇒P21).
・ You can use FOMA terminal in a bathroom.
- Do not put the terminal in the bathtub. Do not use the terminal in
hot water. May cause malfunction.
- Never put FOMA terminal in hot spring water or water containing
soap, detergent or bath powder.