Updating Software - Docomo P-01H Instruction Manual

Error Information Send Setting
When an error occurs on the FOMA terminal, the error
information is created automatically and send it to DOCOMO
if this function is set to "ON".
1
m ▶ ▶
Setting Other setting
▶
Error info send set.
Terminal Security Code
▶
Enter your
▶
ON/OFF

Updating Software

This function is to check whether you need to update
software programs in the FOMA terminal by connecting to
the network, and if necessary, you can download some parts
of software programs using packet communication, and can
update the software programs.
If you need to update the software programs, the DOCOMO
website and "お客様サポート (User support)" in Japanese
iMenu lets you know information about updating software
programs. There are three kinds for updating software
programs; "Auto-update", "Update Now" and "Reserve
Update".
⿠You can update software programs, with data retained,
such as Phonebook entries, images shot by the camera,
or downloaded data in the FOMA terminal; however
note that data may not be protected depending on the
conditions (such as malfunction, damage, or drench) your
FOMA terminal is placed in. You are advised to back up
important data. Note that data such as downloaded ones
might not be backed up.
■Before using Software Update
⿠Do not remove the battery pack while updating software
programs. You may fail to update.
⿠Fully charge the battery before updating software
programs.
⿠It may take time to update (download or rewrite) software
programs.
⿠You cannot make/receive calls, use communication
functions, and other functions while updating software
programs. (You can receive voice calls during download.)
77