Preparing For Bluetooth  Connection - Docomo f-01c Instruction Manual

2
Select "FOMA F01C USB" and click "アンインストールと変更 (Uninstall and
change)" (for Windows XP, "変更と削除 (Change and delete)").
3
Confirm that "FOMA F01C Uninstaller" is displayed and click "はい (Yes)".
The uninstall process starts.
4
If the "ドライバを削除しました (Driver deleted)" screen appears, click "OK".
✔INFORMATION
･
When "FOMA F01C USB" is not displayed on the deletion screen, execute the operations in "Installing FOMA
communication configuration file" again and uninstall.→P7
Dialup communication service
Preparing for Bluetooth
You can make data communication by connecting a PC compatible with Bluetooth and
FOMA terminal using Bluetooth.
･
For operations of a PC, refer to the instructions manual of the PC you use.
･
If the FOMA terminal is put on Bluetooth connection standby,
If the FOMA terminal and a PC are successfully connected in Bluetooth,
◆ Registering a PC to the FOMA terminal
Register a PC for connecting to FOMA terminal with Bluetooth connection for the first time.
･
Depending on the PC environment, Bluetooth passkey may be required.
1
On FOMA terminal, m681.
The FOMA terminal starts the registration waiting and returns to the stand-by display.
･
If connecting cannot be started within 5 minutes, registration is canceled automatically.
2
On a PC, Search for the FOMA terminal and register a device.
･
Perform while the FOMA terminal is in the registration waiting.
･
By some PC instruction manual, "探索 (Quest)" or "サーチ (Search)" may be used instead of "検索
(Retrieve)" or "ペアリング (Pairing)" may be used instead of "機器登録 (Registering device)".
3
When a connecting confirmation screen appears on the FOMA terminal,
select "はい (Yes)".
4
When a registration confirmation screen appears, select "はい (Yes)".
For entering Bluetooth passkey
Enter Bluetooth pass key (one-byte number 4 - 16 digit) g［OK］
･
Enter the same Bluetooth passkey on FOMA terminal and a PC.
･
When a confirmation screen of the default connection device (audio) setting appears, select "No".
･
After the PC is registered as a device and the registration is completed, the FOMA terminal returns
to the stand-by display in the registration waiting state. Perform settings/operations on the PC as
required.
✔INFORMATION
･
When registering FOMA terminal in a PC, distinguish FOMA terminal by the name of device if the PC recognizes
plural devices. When the PC recognizes many devices of the same name, distinguish by the address of device.

connection
(blue) appears on the stand-by display.
10
(blue) blinks.