Docomo f-01c Instruction Manual page 126

6
Confirm that "OK" is displayed and click "ファイル (File)"→Click "ハイパー
ターミナルの終了 (End HyperTerminal)".
7
When confirming disconnection, click "はい (Yes)"→When confirming saving,
click "いいえ (No)".
◆ Setting Show/Hide caller ID
You can set to show/hide call ID for packet communication at once.
Caller ID is your important information. Take care when deciding to disclose your caller ID.
･
If "Not notify" is set when using mopera U or mopera, connection is unavailable.
<Example> Setting under Windows XP
1
Perform Step 1 - 4 in "Setting the dialup connection (APN)".
2
Enter notify/not notify of caller ID in the format "AT＊DGPIR=<n>"→
<n> : 0-2
0 : Connect directly (Default)
1 : Connect prefixing 184 (Not notify)
2 : Connect prefixing 186 (Notify)
･
If nothing is displayed even when AT command is
entered, enter ATE1 and press
3
Confirm that "OK" is displayed and click "ファイル (File)"→Click "ハイパー
ターミナルの終了 (End HyperTerminal)".
4
When confirming disconnection, click "はい (Yes)"→When confirming saving,
click "いいえ (No)".
❖
Show/Hide caller ID function by dialup network settings
The dialup network settings can also be used to append 186 (Notify)/184 (Not notify) to the dialup
connection number.
･
The Show/Hide of caller ID when both of the ＊DGPIR command and dialup network settings are set is
as shown below.
Setting made by ＊DGPIR
Dialup network
setting (<cid>=3)
＊99＊＊＊3#
184＊99＊＊＊3#
186＊99＊＊＊3#
.
command No setting
Caller ID is sent
20
Caller ID is not sent Caller ID is sent
Caller ID is not sent
Caller ID is not sent
Caller ID is sent
.
Caller ID is sent