Docomo f-01c Instruction Manual page 27

Before Using
Turning power ON - Configuring default setting
Initial setting is an operation when FOMA terminal is turned ON
for the first time.
f (2 sec. or more)
a
The screen shown to the right appears.
b
Set required itemseC
[Complete]
Always set Change security code and
Request permit/deny. If you exit without
setting, Initial setting screen reappears
when the power is turned ON the next
time.
c
On a confirmation screen of software update function,
g
The stand-by display appears.
After that, Machi-chara asks for a name (user name). Press g
twice to enter a user name.
Point
･
If no operation is performed, the display light is automatically turned off
according to the settings in Light time-out or eco mode setting. The
display light turns on again if there is any operation or incoming call.
･
The battery usage state is automatically recorded while using the FOMA
terminal. The record is used only for repair diagnosis.
Turning power off : f (2 sec. or more)
Changing the initial setting : mehib
Changing screen display to English : mehddeSelect "English"
Before Using
Checking Profile
Check a model name or own phone number.
For details of checking/changing a mail address, refer to "Mobile
Phone User's Guide [i-mode] FOMA version".
a me0 Profile
The screen shown to the right appears.
<Initial setting screen>
Point
Editing the profile : On User information screen, CeAuthenticateeSet
required itemseC
Checking a phone number during a call : se0
<User information screen>
25