Using Touch Panel - Docomo f-01c Instruction Manual

Screen Explanation

Using touch panel

Operate by touching the display directly.
Notes for using the touch panel
･ Do not put excessive force when opening, closing or rotating the
FOMA terminal. Doing so may cause malfunction or damage of
the keys or the display.
･ The touch panel is designed for being touched lightly with
fingers. Do not push it forcibly with a finger or press it with sharp
objects such as nail, ballpoint pen, pin, etc.
･ Touching the touch panel may not work in the following cases.
Note that it may cause malfunction.
- Operation with gloved hands
- Operation with tip of fingernail
- Operation with a foreign object on the display
- Operation with protective sheet or seal on the display
- Operation with wet hand
- Operation under water
･ Do not press forcibly the frame part around the display. The
touch panel may malfunction.
Point
･
Depending on the operation or function, effective range for the touch
operation may be different or invalid.
Information
･
You can disable touch operation.【
28
タッチON／OFF設定 (Touch ON/OFF setting)】
Basic touch operation
Touch Touch the display lightly once and release the finger. The
operation becomes effective when you release your finger
from the display. This operation is mainly for selecting
menus, items, etc.
Touch Touch the display for 1 sec. or more and release the finger.
(1 sec. or The operation becomes effective when you release your
more) finger from the display.
Slide Keep touching the display, move your finger up, down,
right or left. This operation is used for scrolling screen,
entering hand-writing characters, etc.
Slide Touch the display lightly and flick your finger up, down,
quickly right or left. This operation is for switching pages or
images, or moving to a different chapter or tune, etc.
Pinch While touching the display with the two fingers, widen and
narrow the spacing between the two fingers. This operation
is mainly for zooming in/out the display.
Example: Touch Example: Slide Example: Pinch