Changing Default Settings [Admin.]; Configurable Functions - Riso RZ1090 User Manual

Advanced Features
Changing Default Settings
The default settings can be modified to best suit your needs.
They may be edited as needed.
Important!:
• If the administrator is registered in User Management, only the administrator can change the [Admin.] settings.
(This operation requires input of the administrator's PIN code or connection of the registered USB Flash Drive.)
p.122
• Depending upon the usage environment, the "Admin." features may not be available (the "Admin." tab may not be
displayed).
Consult your dealer (or authorized service representative) for details.
Note:
• The default settings are the values restored when the machine is turned ON or when the

Configurable Functions

:Initial setting (factory default)
* This function can be set only when the option is installed.
Display Access
Button
[Display]
168

Changing Default Settings [Admin.]

Functions
DirectAccess Entry
Store frequently-used functions on the Basic Screen
for each mode.
Selections Entry
Store frequently-used functions on the Selections
screen for each mode.
Display Priority
Select first screen to display following the Startup.
Note:
• The Mode Screen is available only when "Mode Key
Pattern" is set to "Mode Selection".
Mode Key Pattern
Select screens to display when the
pressed.
[Mode Selection]
Pressing the key will open the Mode Screen no
matter which screen you are currently on.
[Loop]
The screen changes as shown below when the
key is pressed.
• Normally: "Master Making Basic Screen" ← → "Print
Basic Screen"
• When a Linked Printer is connected: "Link Basic
Screen" ← → "Master Making/Print Basic Screen"
• When the optional Document Storage Card is
installed: "Scan Basic Screen" ← → "Master Making/
Print Basic Screen"
[Admin.]
p.178
p.178
Mode Screen/RISO Print/
Scanning/Link Mode
Mode Selection/Loop
key is
key is pressed.
Description