Wiper Blade - Replacement - Mitsubishi FUSO FE 2006 Owner's Manual

1 Replacing wiper blade
1. Raise wiper arm
in the direction of the arrow (see figure).
Z05981
2. With the clip spring kept in the pushed position,
press wiper
Z05982
3. The wiper blade will come off the wiper arm.
Install a new blade in the reverse order of
removal.
Use a genuine replacement part.
CAUTION
Do not bring the wiper arms back into position
or operate the wipers without wiper blades, as
this could scratch the windshield.
Z05983
2 Replacing blade rubber only
1. Raise the wiper arm.
Pinch both sides (indicated by arrows) of blade
rubber
blade rubber so that claws
grooves
2. Slide out the blade rubber.
3. Replace the old blade rubber with a new genu-
ine wiper blade rubber.
To install, reverse the removal procedure. Make
sure that the claws fit into the grooves in blade
Z09332
rubber.
Wiper blade – replacement
, and then push clip spring
toward the wiper arm.
with your fingers and then pull the
in the blade rubber.
12-63
are unhooked from