Brake Fluid - Mitsubishi i-MiEV 2011 Owner's Manual

Hide thumbs Also See for i-MiEV 2011:
Table of Contents

Advertisement

Vehicle care and maintenance

Brake fluid

To check the fluid level
The brake fluid level must be between the "MAX" and "MIN"
marks on the reservoir.
The brake fluid level falls slightly with wear of the brake pads,
but this does not indicate any abnormality.
The brake fluid in the master cylinder should be checked when
7
doing other work under the hood. The brake system should also
be checked for leaks at the same time.
If the brake fluid level falls markedly in a short length of time,
it indicates a leak in the brake system.
If this occurs, have the vehicle checked by a certified i-MiEV
dealer.
7-12
Fluid type
Use the recommended brake fluid conforming to DOT 3 or
N00938700261
DOT 4. The reservoir cap must be tightly sealed to keep dirt
and water out.
CAUTION
!
Do not let any petroleum-based fluid touch, mix
with, or get into the brake fluid. This will damage
the seals.
Be careful when handling brake fluid. It can damage
painted surfaces.
Use only the listed brake fluid. Different brands of
brake fluid have different additives, and these can
cause a chemical reaction. Do not mix brands of
brake fluid.
Keep the reservoir tank cap closed to keep the brake
fluid from evaporating.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents