Up-Ground Height Sensor Cleaning; Cleaning Tools - ECOVACS ECO D77 Instruction Manual

Up-ground height sensor cleaning

Multi-Function Cleaning Tool
Removal Tool
Dust Cloth
ENG - 142
Up-ground height sensor is on the front bottom of robot. It can
detect the height difference over 8 centimeters. After cleaning,
replace the Side Brush by matching the brush hub color to the slot
color and then press down in the center of the Brush until you hear
a „click" noise. Give a slight tug on the brush to make sure it is
securely assembled
1. Turn off the power and remove the trash inside dust box.
2. Invert the robot, then put it on the even and clean platform.
3. Use dry cotton cloth to wipe three pieces of optical board of
up-ground height sensor.
Application 1
Cut off hair tangled around the Main Brush, Side Brushes or other
components
Application 2
After using the Cutting Blade, remove tangled hair from the Main
Brush, Side Brushes or other components by pulling the Removal
Tool through the brush bristles.
Application 3
Brush off any dust on the Anti-Drop Sensors, Driving Wheels or
other components for longer product life span.
Cutting Blade
Dust Brush