Using Speed-Dial Numbers - Muratec MFX-1500E Operating Instructions Manual

2
Press the key for the one-touch number you want to erase.
Here, we've selected 02:
Select One-Touch
02:9-1-555-987-6543
3
If you want to erase a number stored in a different one-touch key than what
appears on the , press that key now.
LCD
4
Press . The shows:
ENTER LCD
Erase One-Touch
Check Program/Enter
Important: If you want to quit without erasing the one-touch number
you've selected, press /
5
Press to erase the number.
ENTER
Erase One-Touch
** Complete
To erase another one-touch number, repeat steps 2–5. Or press
standby mode.
Printing a list of one-touch numbers
Forgot which number is stored in which one-touch key? Just print a list of your one-
touch numbers. The list includes each key's number, the Location
fax/telephone number and group number(s) you've stored in the key.
To print a list of one-touch numbers, press /

Using speed-dial numbers

Your fax machine will store up to 128 speed-dial numbers, designated by three-digit
identifier codes from 001 through 128.
Entering or changing a speed-dial number
1
Press / , , 1,
PROGRAM B ENTER
Enter Speed-Dial No.
001:No Number Stored
Note: If a speed-dial number other than 001 appears on the
you have already entered a number for 001.
. The fax will return to step 2.
PROGRAM
**
to return to
STOP
(if any),
ID
, , 3, .
PROGRAM A ENTER
. The shows an empty speed-dial number:
LCD
, it means
LCD
2
Use the numeric keypad to enter the desired speed-dial number's three-digit
identifier code. Here, we've entered 005 and the
Enter Speed-Dial No.
005:No Number Stored
3
If you want to select a different speed-dial number, press that number's three-
digit identifier code now. That number appears on the
Important: When entering the identifier code for speed-dial numbers less
than 100, you must enter leading zeros to make three digits. For
example, 001-099.
4
Press . Depending on whether you already have a number entered for
ENTER
this speed-dial number, the
LCD
005:Fax Number
_
5
Use the numeric keypad to enter the speed-dial number exactly as your
machine should dial it, including whatever access codes your phone system
requires. (You may want to review "Special dialing characters," page 2.7.) The
number can be up to 40 characters in length:
005:Fax Number
9-1-555-567-1234_
Your display can show only 20 characters at a time. To view characters beyond
those 20, press to scroll to the left or /
Note: To erase characters, press
To change one character in the number, press
left, or / to move it right. Press
PROGRAM
ter. Then re-enter the number correctly.
6
When the number appears as you want it, press
Beyond the Basics
shows either:
LCD
Enter Speed-Dial No.
or
005:9-555-397-0123
.
LCD
now shows either:
005:Fax Number
or
9-555-397-0123_
to scroll to the right.
PROGRAM
to erase to the left.
CANCEL
to move the cursor
to erase the charac-
CANCEL
to store it.
ENTER
2.11