Using Speed-Dial Numbers - Muratec F-65 Operating Instructions Manual

Beyond the basics
5
Press . The shows:
ENTER LCD
Check Prog/Enter
Important: If you want to quit without erasing the one-touch number you
have selected, press
6
Press to erase the number.
ENTER
** Complete **
To erase another one-touch number, repeat steps 3–6. Or press
standby mode.
Printing a list of your one-touch numbers
If you forgot which number is stored in which one-touch key, just print a list of your
one-touch numbers. The list includes each key's letter, the Location
group number(s) you may have stored in the key.
To print the list, press
PROGRAM

Using speed-dial numbers

As we mentioned before, your fax machine will store up to 85 speed-dial numbers,
designated by two-digit identifier codes from 01 (the first number) through 85.
Important: Speed-dial numbers 1-9 require a leading zero when entering them
into the machine. For example, enter 01, not just 1.
Speed-dial numbers 10–85 do not require leading zeroes.
Entering or changing a speed-dial number
Important: To erase a number, see "Erasing a speed-dial number" (page 2.10).
1
Press , , 1.
PROGRAM B
Enter Speed-Dial
2.10
. The fax will return to step 3.
PROGRAM
STOP
, , 3, .
A ENTER
2
Press
speed-dial number 01, the
01:No Number
If 01 is the speed-dial number you want to set, skip to step 4. (However, our
examples from here will say "05" rather than "01.")
3
Use the numeric keypad to enter the desired speed-dial number's two-digit
identifier code. Here, we enter 05 and the
to return to 05:No Number
4
If you change your mind and want to select a different speed-dial number,
just repeat step 3 until the number you want appears, then go on to step 5.
5
Press
this speed-dial number, the
, number and
ID
05:Fax Number
then it will show either:
_
6
Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever access codes your phone system may require. (You
may want to review "Special dialing characters," page 2.7.) The number can
be up to 40 characters in length:
9-1-555-9292039_
Note: Your display can show only 16 characters at a time. To view characters
Note: To change a character you have already entered:
7
When the number is as you want it, press
. Depending on whether you already have a number entered for
ENTER
shows:
LCD
or 01:555-584-6950
or 05:555-397-0123
. Depending on whether you already have a number entered for
ENTER
now shows briefly:
LCD
or 555-397-0123_
beyond those 16 (such as with an international long-distance num-
bers), press to scroll to the left or
— Press to move the cursor to the left or
to that character.
— Press to erase the character.
CANCEL
— Enter the digit(s) you want.
shows either:
LCD
to scroll to the right.
to move it to the right,
to store it.
ENTER