Fax Dialing With Programmable One-Touch; Erasing A Programmable One-Touch Key - Muratec MFX-1500E Operating Instructions Manual

Beyond the Basics
8
Press . The shows:
ENTER LCD
Enter Password
_
Note: If this box doesn't have a password, press
9
Use the numeric keypad to enter the
entered 654321:
Enter Password
654321_
When finished, press
ENTER
10
If you want the transmission to begin immediately every time you press the
key, press and skip to step 13.
ENTER
If you want to delay the transmission (perhaps to take advantage of lower
phone rates), press -
COM OPTIONS
11
Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
Option 2: Perform the command at a certain time each day you press the
key. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter 0, 0 and
then the time when the fax could perform the command:
Delayed
Enter Time: 00/17:05
12
Press , .
ENTER ENTER
13
The now displays the next programmable one-touch key.
LCD
If you do not want to enter or change any other key's programming, press
to return your machine to its usual standby mode.
If you do want to enter or change this key's programming, go back to step 4.
If you want to enter or change another key's programming, go back to step 2.
2.54
. Then skip to step 12.
ENTER
- password for the box. Here, we've
ITU T
.
, .
ENTER
on the 30th.")
PM
today.")
PM

Fax dialing with programmable one-touch

To dial a fax call using a programmable one-touch number:
1
Insert the document.
2
Make any necessary adjustments as usual.
3
Press the programmable one-touch key in which you've stored the fax commu-
nication command.
Your fax will perform the operation now, or at whatever time you programmed.
Note: To review the details of each operation, review the instructions for that
operation. See page 2.48 for a list of each operation and where to find it.
If you programmed this key to delay its operation, the
** Reserved **
Jan 29 2000
If you programmed this key to perform the operation immediately after you press it,
the shows the number:
LCD
9-1-972-555-4335
A4 Normal

Erasing a programmable one-touch key

1
Press /
PROGRAM
touch number that has been programmed:
Select Program No.
73:Delayed
Note: If a one-touch number other than 73 appears, it means 73 is empty.
2
Press the programmable one-touch key you want to erase. Here, we've
selected 75:
Select Program No.
STOP
75:Polling
3
To erase a different programmable one-touch key than the one that appears
on the , press that key now.
LCD
shows:
LCD
17:17
, , 2, . The shows the first programmable one-
C ENTER LCD