Programming An E-Mail Address Into The Speed-Dial Numbers; What Is Speed-Dial Registration - Muratec F-320 User Manual

Programming an E-mail address into
the speed-dial numbers

What is speed-dial registration?

Once a recipient's data is registered in speed-dialing, it can be displayed by entering a 3-digit number. When
communications are frequent with a recipient, this setting can save cumbersome entry jobs.
F-360 can store up to 244 speed-dial numbers and F-320 can store up to 144 speed-dial numbers. One speed-dial
number can register both a mail address and a fax number.
Entering a speed-dial number for F-360
Note: If your machine is F-320, see page 3.10.
1
Press MENU, 1, 2, 0, 1, ENTER. The LCD shows the empty speed-dial number.
Note: If a speed-dial number other than 001 appears on the LCD, it means that you have already entered
a number for 001.
2
Using the cursor key, select the speed-dial number in which you want to store a number and/or e-mail
address, and then press ENTER.
Note: You can select the speed-dial number by directly entering that three-digit identifier code. When
entering the identifier code for speed-dial numbers less than 100, you must enter leading zeroes to
make three digits. For example, 001-099.
3
Enter the fax number. Then press ENTER. A fax number can be up to 40 characters in length.
Note: Even when no fax number is entered, the LCD switches to the mail address registration screen.
4
Use the numeric keypad to enter a e-mail address. A mail address can be up to 50 characters in length.
Note: For details on character and number entry, refer to the "F-360 Operating Instructions".
3.8