Sending A Fax Using Monitor/Call Or A Handset - Muratec MFX-1500E Operating Instructions Manual

11
Now, everything is up to the machines — yours and the one you're dialing.
When it makes contact, your machine transmits the stored document from
memory.
Important: If you want to cancel a transmission while scanning the docu-
ment, press the
If you want to cancel a transmission in progress, use the Review
Commands function. See "Review Commands, an introduction"
page 1.23.
12
At the end of the operation, your fax machine beeps and displays:
972-555-2009
** Complete
Important: Whenever you transmit a document, what actually appears on
the top line of the display depends on information stored in the
remote fax. The line may even be blank.
Note: If the call fails, see "Redialing," page 1.22.
key.
STOP
**

Sending a fax using monitor/call or a handset

You also can fax a document using either the monitor speaker or the optional
handset to dial the call.
Note: Faxing this way disables "V.34" mode and sends the fax in normal
Group 3 fashion. This may slow transmission for this document. See page
3.20 for more information.
1
Insert the document to the
ADF
2
Adjust resolution and contrast if necessary.
Press to change the resolution.
RESOLUTION
Press to change the contrast.
CONTRAST
3
Obtain a dial tone, either by:
• Pressing /
MONITOR CALL
... or ...
• Lifting the optional handset.
In either case, the shows:
LCD
** Tel Mode **
_
4
Enter the fax number by using the numeric keypad.
Also, enter access codes with the number, just as for a regular phone call.
Note: For information on one-touch and speed-dial numbers, see 2.8–2.14.
** Tel Mode **
919725552009_
5
When you hear fax tones from the remote unit, press
Note: If a person answers the phone, use the optional handset to tell that
person that you're trying to send a fax. When you hear fax tones,
press .
START
6
If you're using an optional handset, hang up after pressing
7
At the end of the operation, your fax machine beeps and displays:
972-555-2009
** Complete
Note: If the call fails and you used
/ to hang up. Or if you've pressed
MONITOR CALL
transmission, press
STOP
Also see "Redialing manually," next page, if the call fails.
.
.
START
.
START
**
/ to dial, press
MONITOR CALL
to begin the fax
START
to end it.
Getting started
-
ITU T
1.21