Using Speed-Dial Numbers - Muratec F-360 Operating Instructions Manual

Advanced features

Using speed-dial numbers

Your fax machine will store up to 244 speed-dial numbers, designated by three-digit
identifier codes from 001 through 244.
Entering or changing a speed-dial number
1
Press , 1, 2, 0, 1,
MENU ENTER
Note: If a speed-dial number other than 001 appears on the
you have already entered a number for 001.
2
Using the cursor key, select the speed-dial number in which you want to store
a number or change a previously stored number.
Note: You can select the speed-dial number by directly entering that three-
digit identifier code. When entering the identifier code for speed-dial
numbers less than 100, you must enter leading zeroes to make three
digits. For example, 001-099.
3
Press . The shows:
ENTER LCD
4
Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever access codes your phone system requires. (You may
want to review "Special dialing characters," page 3.1.) The number can be up
to 40 characters in length:
Your can show only 30 characters at a time. To view characters beyond
LCD
those 30, press to scroll to the left or
5
When the number is as you want it, press
shows:
3.4
. The shows:
LCD
LCD
to scroll to the right.
to store it. The
ENTER
6
Select "Location" and press
Note: If a Location
7
Enter the Location
character" on page 1.12.) A number's Location
in length.
, it means
8
Press
ENTER
9
Select "Exit" and press
The
LCD
If you do want to enter another speed-dial number, go back to step 2.
If you do not want to enter any more speed-dial numbers, press
Erasing a speed-dial number
1
Press
MENU
2
Select the speed-dial in which you want to erase.
Note: You can select the speed-dial number by directly entering that three-
3
Press
ENTER
now
LCD
Important: If you want to quit without erasing the speed-dial number
. The
ENTER LCD
is already registered in this one-touch key, it is shown
ID
on the . If you wish to change the location
LCD
erase it and then enter another location
. (Regarding how to enter the character, see "Entering
ID
to save the setting.
.
ENTER
will display the next empty speed-dial number.
, 1, 2, 0, 2, . The shows:
ENTER LCD
digit identifier code. When entering the identifier code for speed-dial
numbers less than 100, you must enter leading zeroes to make three
digits. For example, 001-099.
. The shows:
LCD
you've selected, press [No]. The fax will return to step 2.
shows:
, press to
ID CANCEL
.
ID
may be up to 24 characters
ID
to finish.
STOP