Table of Contents
Advertisement
What you see on the
LCD
Communication Error
Copy Off
Copying Not Completed
Dept. Code Full
Document Full
Document Jam
ContStor Enter/Cancl
Document Stored
Drum Near End
Enter No. (0-32)
What it means/What to do
A communication error disrupted the reception
or transmission. If you were transmitting, press
to clear the error message and then re-try
STOP
the transmission. If you were receiving a fax, try
to contact the other person and have him/her re-
try the transmission. (The problem may be
entirely with his/her machine, phone line, etc.)
You tried to use your fax machine to make a
copy, but the unit's copy protection feature (page
1.31) is on, preventing such use. Turn off copy
protection.
You tried to switch to the fax mode by pressing
/
during copying from the multi paper
COPY
FAX
tray. Complete the copying first, then try again.
You tried to enter department code more than
100. Your machine can store up to 100 depart-
ment codes.
You tried to enter an document into an F-Code
box, but the machine has reached its capacity.
Delete documents stored in F-Code boxes until
the machine will let you proceed.
An original document jam while you are using
the
for either faxing or copying. See page 3.1
ADF
for instructions on clearing the jam.
You tried to erase a batch box which contains at
least one document. Erase the document(s), then
try again.
Your drum will need to be replaced soon.
Press
to clear the message, then contact
STOP
your authorized Muratec dealer to purchase a
new drum cartridge if you don't already have
one.
You tried to enter a call group number greater
than 32. Your machine can maintain 32 call
groups, numbered 1-32 (call group 0 covers all
the groups). Determine the correct call group
identifier number and enter it, instead.
What you see on the
LCD
Enter No. (1-99)
Enter Scan Size
Feeder In Use
Hang Up Phone
In Relay Box
In Secure Box
Insert Document
Invalid I.D. Code
Invalid Number
Invalid Passcode
Line Busy
What it means/What to do
You tried to request greater than 99 copies from
your fax, which can create 1-99 copies of a docu-
ment. Select the correct quantity and enter it.
When you using the flatbed scanner (
must manually enter the scan size of your docu-
ment. Press
to choose the size.
BOOK DOC SIZE
The command you're trying to enter requires the
use of the
, which is already in use. Wait for
ADF
the machine to stop using the
, then try
ADF
again.
The optional handset is off-hook.
Hang it up, making sure the upper part of the
handset presses down on the "hook" button.
You tried to store a document for polling in an
F-Code box which is set to be a relay box.
Select an F-Code box which is set to be a bulletin
box, then try again.
You tried to store a document for polling in an
F-Code box which is set to be a security box.
Select an F-Code box which is set to be a bulletin
box, then try again.
There was no document in the document feeder
when you tried to send a fax or make a copy.
Place a document and try again.
The F-Code box
.
. code you entered isn't valid.
I
D
Try re-entering your F-Code box
.
. code.
I
D
You pressed a key which has no function during
the current operation.
The protection passcode you entered isn't valid.
Repeat the operation, entering the correct protec-
tion passcode.
You tried to erase a document which someone is
polling from your machine. Wait for the fax to
complete the polling operation, then try again.
Just in case ...
), you
FBS
3.7
Advertisement
Table of Contents
