Muratec MFX-1500E Operating Instructions Manual page 55

9
The now displays:
LCD
02:Name ;Upper
_
The machine is now prompting you for a name — a Location
able to find it in the EasyDial directory (see page 2.15).
If you do not want to enter or change this Location
If you do want to enter or change this Location
10
Enter the Location the same way you entered your fax name during
ID
EasyStart. A number's Location
Important: As in EasyStart, enter letters and other non-numeric characters
by using the one-touch keys.
02:Name ;Upper
_
The word "Upper" means the machine is currently set for entering only upper-
case letters. If you press , the machine will see it as an
R
To enter a lower-case letter, press
02:Name ;Lower
_
This means pressing one-touch keys will enter lower-case letters: pressing
will produce an r (not an ) on the display.
R
To switch back for upper-case entries, press
To enter spaces, punctuation and symbols, use the one-touch keys.
You can also use the function to enter characters. Please review the
CODE
explanation on page 2.2.
Note: To erase characters, press
To change just one character in the name, press
left, or / to move it right. Press
PROGRAM
character. Then re-enter it correctly.
11
Press to save the setting and continue.
ENTER
02:Name ;Upper
or
S. W. Region Office_
— so you'll be
ID
, skip to step 11.
ID
, go on to step 10.
ID
may be up to 24 characters in length.
ID
(not an r).
R
. The display changes to:
ALPHABET
.
ALPHABET
to erase to the left.
CANCEL
to move the cursor
to erase the
CANCEL
12
The now displays:
LCD
02:Group No.
_
You may now assign this number to up to 32 call groups. (If necessary, review
"Call groups," page 2.8.)
If you do not want to change this number's call group, go to step 14.
If you do want to change this number's call group, go on to step 13.
13
Use the numeric keypad to enter the call groups for this number. There are 32
possible call groups, numbered 1–32.
Here, we've entered 3 to assign this one-touch number to Call Group 3:
02:Group No.
3_
If you want to assign the number to more than one call group, insert a
comma after each number (except the last one) by pressing
example, if you enter 3,
touch number to Call Groups 3, 16 and 27, the
02:Group No.
3,16,27_
Note: To assign this number to all 32 call groups, enter 0 (zero).
R
Note: To erase characters, press
To change just one character in the setting, press
left, or /
PROGRAM
character. Then re-enter it correctly.
14
Press .
ENTER
The will display the next empty one-touch number.
LCD
If you do want to enter this one-touch number, go back to step 4.
If you do not want to enter any more one-touch numbers, press
If you do not want to enter the currently displayed one-touch number but do
want to enter another one-touch number, go back to step 2.
Use the autodialer labels in your fax's packaging to write down the stored numbers
for easy reference. You can also print out a directory of your call groups.
See page 2.14.
02:Group No.
or
2,6_
GROUP DIAL
, 1, 6, , 2, 7 to assign this one-
GROUP DIAL GROUP DIAL
shows:
LCD
to erase to the left.
CANCEL
to move the cursor
to move it right. Press to erase the
CANCEL
Beyond the Basics
. For
to finish.
STOP
2.9