Muratec MFX-1500E Operating Instructions Manual page 93

13
Press .
START
If in step 10 you chose an immediate transmission, your fax machine begins dialing.
If you chose a delayed command, the machine shows "Reserved" on the
ing that it has stored the command in memory and will complete it later.
F-Code polling
1
Press - five times and then press
COM OPTIONS
Enter Sub-Address
_
2
Use the numeric keypad to enter the appropriate sub-address.
In this example, we've entered 123456.
Enter Sub-Address
123456_
Note: If you make a mistake, press
enter the correct number.
3
Press . The shows:
ENTER LCD
Enter Password
_
Note: If this sub-address does not have a password, skip to step 5.
4
Use the numeric keypad to enter the password. In this example, we've
entered 654321.
Enter Password
654321_
5
Press . The shows:
ENTER LCD
Enter Fax Number
_
6
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press
7
What you do now depends upon when you want the polling to begin.
• To have it begin now, skip to step 10.
• To delay it, go on to step 8.
, indicat-
LCD
.
ENTER
to erase the character, then
CANCEL
.
START
8
Press - , . The
COM OPTIONS ENTER
Delayed
Enter Time: 15/17:05
9
Use the numeric keypad to enter the day and time when the polling should
begin, then press .
ENTER
10
Press .
START
If in step 7 you chose an immediate polling, your fax machine begins dialing. If you
chose a delayed command, the machine shows "Reserved" on the
it has stored the command in memory and will complete it later.
Beyond the Basics
shows:
LCD
, indicating that
LCD
2.47