Printing
STEP 3: Printing Tests and Normal Cleaning
Procedure
Open the Utility window.
P.8, "How to Open the Utility Window / Exit the Utility"
To check for nozzle clogging again Return to
If the nozzle clogging is not fixed, perform "Normal Cleaning" again. For information about "Medium
Cleaning" and "Powerful Cleaning," refer to page 74 "Medium and Powerful Cleaning."
22
Chapter 1 The Basics
Click [Check Nozzle Condition].
Click [Test Print].
The test pattern is printed. Follow the on-screen
instructions and check for dot drop-out.
Nozzle clogging occurs Proceed to
Nozzles are not clogged Click [Close].
Select [Cleaning Normal] and click [Go].
Normal cleaning starts.
.
.