Table of Contents
Advertisement
Replacing the Felt Wiper
Replace the felt wiper.
When the warning alarm sounds during replacing the felt wiper
An alarm sounds about 30 minutes after the start of the operation. Perform the operation by following the
message displayed in the Utility window.
CAUTION
Procedure
Open the Utility window.
P.8, "How to Open the Utility Window / Exit the Utility"
When the operation is completed, close the front cover.
Always carefully follow the procedures in accordance with the instruc-
tions. Otherwise a sudden movement of the machine may cause injury.
The felt wiper is a component used for cleaning the
print heads. When the message shown in the figure
appears on the Utility icon on the computer task tray,
it is time to replace the wiper with a new one.
To purchase a felt wiper, contact us directly or your
authorized Roland DG Corp. dealer.
In the [Replace Tools] tab, click [Replace Felt
Wiper].
Procedures for replacing the felt wiper are displayed.
Carefully read the on-screen instructions and start the
replacement work.
Chapter 3 Maintenance
Replacing Comsumable Parts
79
Advertisement
Table of Contents
