How To Replace Ink Cartridges - Roland VersaStudio BR-20 Master Manual

Checking Ink Levels and Replacing

How to Replace Ink Cartridges

When ink runs out, a warning beep is heard and printing is temporarily suspended. Pull out the empty cartridge
and insert a new one. Then printing resumes.
 Install the cartridge with the label
facing up.
 Carefully pull out and insert cartridg-
es one by one.
 Insert firmly, as far as it will go.
 Make sure to replace with the same type of cartridge.
 Never mix different types of cartridges.
 Never leave an ink cartridge slot empty. This may cause the print heads to clog up.
 Do not remove or insert a partially used ink cartridge without reason.
 Do not pull out an ink cartridge when the printer is in operation.
WARNING
70
Chapter 3 Maintenance
Points to note when replacing cartridges
Never store ink, cleaning fluid or discharged fluid under the following
conditions:
 Close to naked flames
 High temperatures
 Near bleach or other oxidizers, or explosives
 Keep out of the reach of children.
These chemicals are a fire risk. If children swallow these chemicals, they are
toxic and a health hazard.
Always gently shake the new
cartridge before installing.
Replace with the same type and
color of cartridge.