Table of Contents
Advertisement
Adjusting printing & cutting
When printing and cutting at the same time, adjust and align the printing and cutting positions. Depend-
ing on the media thickness, sometimes printing and cutting positions are very slightly out of alignment. It is
recommended to set correction values to suit the media.
Procedure
Load the media to be cut.
P.15, "STEP1: Loading Media"
Open the Utility window.
P.8, "How to Open the Utility Window / Exit the Utility"
Follow the on-screen instructions and enter the values for [New Value for Scanning]
and [New Value for Feeding].
Click [Apply].
The values in [New Value for Scanning] and [New Value for Feeding] change to "0."
Click [Close].
Cutting / Printing & Cutting
Click [Print_Cut Adjustment].
Click [Print and Cut Pattern].
The test pattern is printed.
Chapter 2 Fully Utilizing the Machine
31
Advertisement
Table of Contents
