Utility : Other Function
Performing Various Adjustments Through a Sequence of Operations
You can perform various output adjustments through a sequence of operations by clicking [Adjust All] on the
[Adjustment] tab.The adjustment method is the same as when adjusting settings individually.
[Next]: Continues to the adjustment screen currently displayed on the screen.
[Skip]: Skips the adjustment currently displayed on the screen.
[Cancel]: Cancels the adjustment process.
The adjustments vary depending on the output method. Refer to the table below.
Check Nozzle Con-
dition
Bidirectonal adjust-
ment *
Calibrate Sheet
Feed Amount
Cut Adjustment
Print Cut Adjust-
ment
CropCut Adjusut-
ment
* When printing with CMYK ink only, this is available when bidirectional printing is set in the BN-20 driver or
Roland VersaWorks.
* Bidirectional printing cannot be performed for print jobs that use metallic silver ink or white ink.
62
Chapter 2 Fully Utilizing the Machine
Print
Cutting
(Only)
(Only)
√
√
√
√
√
When you click [Adjust All], adjustment information
is displayed.
Printing & Cut-
ting
√
√
√
√
√
Crop Cut
√
√
√
√
√
√