Table of Contents
Advertisement
When you make output from Roland VersaWorks
You can set the dry time in Roland VersaWorks as well. For information on its setting method, refer to Help of
Roland VersaWorks.
Note on the setting in Roland VersaWorks
When you set the dry time in Roland VersaWorks, if [Use Printer Settings] is set, 0 is set to the dry time. You
should note that the setting in the BN-20 driver is not reflected.
Select [Dry Time] in [Options].
The appropriate setting time varies according to the
media. Set longer time when you use a medium on
which it takes time to dry ink.
Click [Output].
When the printer starts drying, the remaining dry
time is displayed on the utility.
Chapter 2 Fully Utilizing the Machine
Utility : Other Function
65
Advertisement
Table of Contents
