Replacing Consumable Parts
Replacing the Wiper
When the warning alarm sounds during replacing the wiper
An alarm sounds about 30 minutes after the start of the operation. Perform the operation by following the
message displayed in the Utility window.
CAUTION
Procedure
Open the Utility window.
P.8, "How to Open the Utility Window / Exit the Utility"
When the operation is completed, close the front cover.
78
Chapter 3 Maintenance
Replace the wiper.
Always carefully follow the procedures in accordance with the instruc-
tions. Otherwise a sudden movement of the machine may cause injury.
The wiper is a component used for cleaning the print
heads. When the message shown in the figure appears
on the Utility icon on the computer task tray, it is time
to replace the wiper with a new one.
To purchase a wiper, contact us directly or your au-
thorized Roland DG Corp. dealer.
In the [Replace Tools] tab, click [Replace Wiper].
Procedures for replacing the wiper are displayed. Carefully
read the on-screen instructions and start the replacement
work.