Roland VersaStudio BR-20 Master Manual page 96

Sign maker
Table of Contents

Advertisement

Read this section whenever you face a problem
19. If it is necessary to restart your computer, a window prompting you to restart it appears. Click [Yes].
20. The uninstallation finishes after the computer restarts.
(*)
When using the DVD-ROM, specify the folder as shown below (assuming your DVD-ROM drive is the D drive).
D:\Drivers\25D\WINVISTAX64 (64 bit edition)
D:\Drivers\25D\WINVISTAX86 (32 bit edition)
Windows XP
1. Before you start uninstallation of the driver, unplug the USB cables from your computer.
2. Log on to Windows as "Administrators" right.
3. From the [Start] menu, click [Control Panel]. Click [Printers and Other Hardware], then click [Printers and
Faxes].
4. Click the model name's icon you are using. From the [File] menu, choose [Delete].
5. A message prompting you to confirm deletion appears. Click [Yes].
6. Go to [File] and select [Server Properties].
7. Click the [Driver] tab, then from the [Installed printer drivers] list, choose the machine to delete.
8. Click [Delete]. When the prompt message appears, click [Yes].
9. From the [Start] menu, select [Run], then click [Browse].
10. From the [File Locations] list, choose the name of the drive or folder where the driver is located. (*)
11. Select "SETUP.EXE" and click [Open], then click [OK].
12. The Setup program for the driver starts.
13. Click [Uninstall] to choose it. Select the machine to delete, then click [Start].
14. If it is necessary to restart your computer, a window prompting you to restart it appears. Click [Yes].
15. The uninstallation finishes after the computer restarts.
(*)
When using the DVD-ROM, specify the folder as shown below (assuming your DVD-ROM drive is the D drive).
D:\Drivers\25D\WINXPX64 (64 bit edition)
D:\Drivers\25D\WINXPX86 (32 bit edition)
94
Chapter 4 Appendix

Advertisement

Table of Contents
loading

Table of Contents