Setting The Clock/Alarm; Setting The Total Kilometres - VDO X3DW Instruction Manual

D GB F I

5.3 Setting the Clock/Alarm

How to set the clock:
Using go to SETTINGS/
SELECT. Confirm with M
You are now in setting mode
(pressing C for 3 seconds gets
you back to function mode).
Using go to CLOCK/ALARM/
SET. Confirm with .
M
CLOCK/ALARM/CLOCK SET.
Confirm with M .
CLOCK/ALARM/24-H-MODE.
You can switch to 12-H mode
using . Confirm with
CLOCK...SET HOUR/CONTINUE
Set the hours using .
Confirm the hour setting
with M .
CLOCK...SET MINUTES/
CONTINUE. Set the minutes
using . Confirm the minutes
setting with M .
44 X3DW
CLOCK/SET OK? Confirm with M .
The display confirms: CLOCK/SET DONE.
Automatic return to SETTINGS/SELECT.
How to set the alarm:
Using go to SETTINGS/
SELECT. Confirm with
You are now in setting mode
(pressing for 3 seconds gets
C
you back to function mode).
Using go to CLOCK/ALARM/
SET. Confirm with
CLOCK/ALARM/CLOCK SET.
Using you can switch to
M . alarm set.
CLOCK/ALARM/ALARM SET.
Confirm with
ALARM OFF or ALARM ON
appears on the display.Switch the alarm OFF
or ON using . With ALARM ON you come
to the alarm time setting. Confirm with
VDO CYCLECOMPUTING
M .

5.4 Setting the total kilometres

You can program the values on the distance coun-
ter at any time (e.g. at the end of a season).
M .
M .
.
M
www.vdocyclecomputing.com
ALARM/SET OK? Confirm with
ALARM...SET HOUR/CONTINUE
Set the hours using up/down. The display confirms: ALARM/SET DONE.
Confirm the hour setting Automatic return to SETTINGS/SELECT.
with M .
If you have set the alarm to ON, the alarm symbol
appears on the bottom left of the display
ALARM...SET MINUTES/ -Symbol.
CONTINUE. Set the minutes
using . Confirm the minutes
setting with M .
Using go to SETTINGS/
SELECT. Confirm with .
M
You are now in setting mode
(pressing C for 3 seconds gets
you back to function mode). ODO BIKE 1/SET OK? Confirm with
The display confirms ODO BIKE 1/SET DONE.
Automatic return to SETTINGS/SELECT.
Using go to ODOMETER/
SET. Confirm with M .
ODOMETER/ODO BIKE 1
(use to go to setting for
BIKE 2). Confirm with .
M
ODO BIKE 1 ...SET DISTANCE/
CONTINUE.
I F GB D
M .
You can set the flashing digits
using .
To access the next digit, con-
firm with M . Repeat the steps
until the last digit on the right
is flashing. Confirm with M .
M .
X3DW 45