Setting The Clock/Alarm; Setting The Total Kilometres - VDO X3DW Instruction Manual

GB SLO PL JP

5.3 Setting the clock/alarm

How to set the clock:
Using go to SETTINGS/
SELECT. Confirm with M
You are now in setting mode
(pressing C for 3 seconds gets
you back to function mode).
Using go to CLOCK/ALARM/
SET. Confirm with .
M
CLOCK/ALARM/CLOCK SET.
Confirm with M .
CLOCK/ALARM/24-H-MODE.
You can switch to 12-H mode
using . Confirm with
CLOCK...SET HOUR/CONTINUE
Set the hours using .
Confirm the hour setting
with M .
CLOCK...SET MINUTES/CONTINUE
Set the minutes using
Confirm the minutes setting
with M .
16 X3DW
CLOCK/SET OK? Confirm with M .
The display confirms: CLOCK/SET DONE.
Automatic return to SETTINGS/SELECT.
How to set the alarm:
Using go to SETTINGS/
SELECT. Confirm with
You are now in setting mode
(pressing C for 3 seconds gets
you back to function mode).
Using go to CLOCK/ALARM/
SET. Confirm with
CLOCK/ALARM/CLOCK SET.
Using you can switch to
alarm set.
M .
CLOCK/ALARM/ALARM SET.
Confirm with
ALARM OFF or ALARM ON appears on the display.
Switch the alarm OFF or ON using
. ALARM ON you come to the alarm time setting.
Confirm with M .
VDO CYCLECOMPUTING
M .

5.4 Setting the total kilometres

You can program the values on the distance coun-
ter at any time (e.g. at the end of a season).
M .
M .
. With
www.vdocyclecomputing.com
ALARM...SET HOUR/CONTINUE ALARM/SET OK? Confirm with
Set the hours using up/down.
Confirm the hour setting The display confirms: ALARM/SET DONE.
with M . Automatic return to SETTINGS/SELECT.
ALARM...SET MINUTES/ If you have set the alarm to ON, the alarm symbol
CONTINUE. Set the minutes appears on the bottom left of the display
using . Confirm the minutes -Symbol.
setting with M .
Using go to SETTINGS/
SELECT. Confirm with M .
You are now in setting mode
(pressing C for 3 seconds gets
you back to function mode). ODO BIKE 1/SET OK? Confirm with
The display confirms ODO BIKE 1/SET DONE.
Automatic return to SETTINGS/SELECT.
Using go to ODOMETER/
SET. Confirm with M .
ODOMETER/ODO BIKE 1
(use to go to setting for
BIKE 2). Confirm with M .
ODO BIKE 1 ...SET DISTANCE/
CONTINUE.
JP PL SLO GB
M .
You can set the flashing digits
using .
To access the next digit, con-
firm with M . Repeat the steps
until the last digit on the right
is flashing. Confirm with .
M
M .
X3DW 17