Page 1
Installation video Operating video Settings video www.vdocyclecomputing.com/service...
Page 2
M3 WL Preface Congratulations In choosing a VDO computer, you have opted for high-quality device with first rate technology. To optimally use the computer, we recommend that you read this manual carefully. It contains full operating instructions and many useful tips.
M3 WL Table of contents ..........................Display Navigator ....................Buttons Resetting the navigator to zero ......................Functions Trip section counter ........... Accessing the total values Resetting the trip section counter to zero ..............Operation while cycling Resetting trip data after the trip ............
M3 WL Display The VDO M3 WL has a large, easy-to-read display that can be divided into three areas. Area 1: The top line of the display permanently indicates Area 1 the current speed. Area 2: The middle line uses clear text to display a description Area 2 of the selected indicator function.
Page 5
The VDO M3 WL can be used on two bikes. The indicator icons 1 and 2 show you whether your VDO M3 WL is currently using the settings for bike 1 or bike 2. “UP/DOWN arrow” The arrows indicate whether you are currently travelling...
M3 WL Buttons The VDO M3 WL has two buttons. In function mode: – Scroll backwards through the functions – Open the setting mode (press and hold) – Access the total values for distance and ride time (press and hold) In setting mode: –...
M3 WL Functions The VDO M3 WL has the following functions: Current speed The current speed is permanently shown on the display. With a wheel circumference of 2,155 mm, the maximum possible speed is 199 kmh or 124 mph. Current distance The current distance (distance for the current trip) counts up to 9,999.99 km or miles.
Page 8
M3 WL Functions Section time The VDO M3 WL has a trip section counter. The trip section counter is like a stopwatch. If the trip section counter is running, the section time is recorded, as on a stopwatch. When the trip section counter is running, the section distance is also recorded.
Page 9
Information on how to operate the navigator can be found on page 31. Temperature The VDO M3 WL has a temperature indicator. The temperature is displayed in increments of 0.1 degrees. Clock The current time is displayed in 24 H or 12 H mode.
M3 WL Accessing the total values The total values for the distance travelled and the ride time are accessed separately from the data for the CURRENT trip. To access the totals, press and hold the SET button until the menu opens. Press the SET button to open the Totals (total values) screen.
Page 11
M3 WL Accessing the total values If you have also used bike 2, when continuing scrolling by pressing the BIKE button, the values for bike 2 are also displayed here. Total distance Press the BIKE button to scroll on to bike 2 Total ride time Press the BIKE button to scroll on to...
The model name VDO M3 WL and the time appear on the display. If you set off again after a break, the VDO M3 WL has an auto-start function. The VDO M3 WL instantly switches back to the function mode...
M3 WL Attaching the handlebar bracket You can attach the computer to the right or left of the handlebars or in the centre on the stem. Attach the – handlebar bracket in the corresponding position. STEP 1 Decide whether you want to attach the computer to the handlebars or the stem.
STEP 2 90° – 45° Place the spoke magnet around an outside spoke. The VDO logo of the rod-shaped magnet core should point toward the ✔ transmitter. Align the magnet with the cross-hatched sensor marking on the transmitter at a distance of 1- 5 mm.
M3 WL Inserting the computer into the bracket The VDO twist-click system securely connects the computer to the handlebar bracket. Lock How to insert the computer: STEP 1 UNLock Place the computer into the bracket in a 10 o’clock position.
– Heart rate (if the heart rate option is activated) – Cadence (if the cadence option is activated) The VDO M3 WL has an automatic bike recognition function. Depending on whether you are using bike 1 or bike 2, the data is recorded for bike 1 or bike 2.
M3 WL Settings – language The following display languages can be selected for the VDO M3 WL: – German – English – French – Italian – Spanish – Dutch – Polish How to select the language: Press and hold the SET button until the settings menu opens.
Page 18
If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any further settings, press and hold the SET button. The settings menu closes. The VDO M3 WL returns to function mode.
M3 WL Settings – unit Use the unit settings to specify the measurement formats for: – Speed (kmh or mph) – Temperature (C or F) – Clock (24-hour or 12-hour with AM/PM) How to set the unit: Press and hold the SET button until the settings menu opens.
Page 20
If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any further settings, press and hold the SET button. The settings menu closes. The VDO M3 WL returns to function mode.
M3 WL Settings – wheel circumference/wheel size You can set the roll circumference of your wheel in kMh Wheel MPh Wheel millimetres on the VDO M3 WL or select the applicable circum- circum- tyres from a tyre table. ference ference...
Page 22
M3 WL Settings – wheel circumference/wheel size How to set your wheel circumference: Press and hold the SET button until the settings menu opens. Press the BIKE button to switch from Totals to Settings. Press the SET button to open the settings. “Language”...
Page 23
If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any further settings, press and hold the SET button. The settings menu closes. The VDO M3 WL returns to function mode.
Page 24
If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any further settings, press and hold the SET button. The settings menu closes. The VDO M3 WL returns to function mode.
M3 WL Settings – clock In the VDO M3 WL, you can set the clock in 12-hour AM/PM format or 24-hour format. Specify the desired time format in the unit settings (see page 19). How to set the time: Press and hold the SET button until the settings menu opens.
Page 26
If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any further settings, press and hold the SET button. The settings menu closes. The VDO M3 WL returns to function mode.
M3 WL Settings – total values – total distance You can set the total distance ridden on the VDO M3 WL. For example, you can enter your data here at the start of a new cycling season. You can set the total distance separately for bike 1 and bike 2.
Page 28
If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any further settings, press and hold the SET button. The settings menu closes. The VDO M3 WL returns to function mode.
M3 WL Settings – total values – total ride time You can set the total ride time on the VDO M3 WL. E.g. you can set your total ride time (cumulative ride time for all trips) at the start of the new cycling season).
Page 30
If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any further settings, press and hold the SET button. The settings menu closes. The VDO M3 WL returns to function mode.
M3 WL Setting the navigator The navigator is a second, completely independent trip distance counter. The navigator can: – be reset to zero any number of desired times during a trip – be set to a distance value – count forwards or backwards from the set distance value. How to set the navigator: Press the BIKE button to display the navigator function.
Once all the digits have been set, confirm the entry by pressing the SET button. The response “Set OK” appears on the display. The VDO M3 WL returns to function mode. Resetting the navigator to zero The navigator can be reset to zero any number of desired times during a trip.
M3 WL Trip section counter The VDO M3 WL has a time and distance counter that works similarly to a stopwatch. When the trip section counter is running, the time and distance covered in this time are recorded. Starting the trip section counter Simultaneously press the BIKE and SET buttons.
– Section ride time Resetting trip data after the trip After each trip, you can reset the data for this trip to zero. The VDO M3 WL is then ready for the next trip. ATTENTION: your total distance (total number of kilometres/ miles ridden) and total ride time are not reset to zero.
M3 WL Battery status indicator The VDO M3 WL has a low battery warning. If the remaining battery capacity falls below a certain level, a warning appears on the display. Press any button to clear the warning. Following a low battery warning, you still have approximately two weeks to replace the battery.
M3 WL Replacing the battery in the speed transmitter The battery in the speed transmitter should be replaced annually to guarantee seamless wireless transmission. You need a 3 V 2032 battery. We recommend using a branded battery from Sony, Panasonic, Varta or Duracell. How to replace the battery: STEP 1 oPEN...
M3 WL Terms of guarantee VDO Cycle Parts offers a two-year guarantee on your VDO If your complaint is legitimate, you will receive a comparable computer, starting from the date of purchase. This replacement device. You are not entitled to a replacement of...
M3 WL Troubleshooting Error Possible cause Correction Half segments on the display Computer software not running Remove and re-insert the battery (e.g. after a battery change) correctly after battery change No speed displayed Distance from sensor to magnet too Correct the sensor and magnet positions great No speed displayed Computer not properly clicked...
M3 WL Technical specifications Computer: Temperature indicator range on the display: Approx. 49 H x 33 B x 12 D mm -20 to +70 °C or -4 to +158 °F Computer weight: Speed range for wheel size 2,155 mm: Approx. 30 g Min 2.0 km/h, Handlebar bracket weight: Max 199 km/h...
Page 40
The declaration of conformity can be viewed at: Neustadt/Weinstraße, declare that when used as intended, www.vdocyclecomputing.com. the VDO cycle computer with wireless transmission VDO M3 WL and the transmitter D3-SPD comply with the essential requirements established in Article 3 of the R&TTE Directive 1999/5/EC. Neustadt, October 2013 FCC-Addendum This device complies with part 15 of the FCC Rules.