Setting The Clock; Setting The Total Kilometres; Switch From Bike1 To Bike2 - VDO X2 Instruction Manual

D GB F I

5.3 Setting the clock

How to set the clock:
Using go to SETTINGS/
SELECT. Confirm with M .
You are now in setting mode
(pressing C for 3 seconds gets
you back to function mode)
Using go to CLOCK/SET.
Confirm with .
M
CLOCK/24-H-MODE (you can
switch to 12-H mode using
Confirm with M .

5.4 Setting the total kilometres

You can program the values on the distance coun-
ter at any time (e.g. at the end of a season).
Using go to SETTINGS/
SELECT. Confirm with M .
You are now in setting mode
(pressing C for 3 seconds gets
you back to function mode).
34 X2
CLOCK...SET HOUR/CONTINUE
Set the hours using
Confirm the hour setting
with M .
CLOCK...SET MINUTES/
CONTINUE. Set the minutes
using . Confirm the
minutes setting with
CLOCK/SET OK? Confirm with M .
The display confirms: CLOCK/SET DONE.
. Automatic return to SETTINGS/SELECT.
Using go to ODOMETER/
SET. Confirm with M
ODOMETER/ODO BIKE 1
(use to go to setting for
BIKE 2). Confirm with
ODO BIKE 1 ...SET DISTANCE/
CONTINUE.
VDO CYCLECOMPUTING
You can set the flashing digits
using
To access the next digit, con-
firm with
. until the last digit on the right
is flashing. Confirm with
5.5 Switch from Bike 1 to Bike 2
Your VDO computer can be used on two bikes.
If you switch from bike 1 to bike 2, you must set the
. computer to the bike being used before the ride.
M
Using
SELECT. Confirm with
You are now in setting mode
(pressing
you back to function mode).
Using
Confirm with
.
BIKE 1 (use
bike 2). Confirm with
M .
BIKE 1 /SELECT OK? Confirm with
www.vdocyclecomputing.com
ODO BIKE 1/SET OK? Confirm with
.
The display confirms ODO BIKE 1/SET DONE.
M . Repeat the steps Automatic return to SETTINGS/SELECT.
M .
The display confirms BIKE/SELECT DONE
Automatic return to SETTINGS/SELECT
go to SETTINGS/
M .
C for 3 seconds gets
ATTENTION, important note: When switching from
bike 1 to 2 or vice versa, the data for day's trip-
distance, ride time, average speed and max. speed
go to BIKE/SELECT for the last trip are set to zero.
M .
to switch to
M .
.
M
I F GB D
M .
The selected bike 1 or 2) is
shown on the display bottom
left. ( )
X2 35