M2 WL Preface Congratulations In choosing a VDO computer, you have opted for high-quality device with first rate technology. To optimally use the computer, we recommend that you read this manual carefully. It contains full operating instructions and many useful tips.
M2 WL Display The VDO M2 WL has a large, easy-to-read display that can be divided into three areas. – The top line of the display shows the value for the selected function. – The middle line displays “am” or “pm” if the 12-hour clock format is used.
M2 WL Functions The VDO M2 WL has the following functions Current speed With a wheel circumference of 2,155 mm, the maximum possible speed is 199 kmh or 124 mph. Current distance The current distance counts up to 999.99 km or miles.
M2 WL Functions Current time (in 24-h or 12-h format) 24-H format 12-H format Total distance (total for all day trips) The total distance counts up to 99,999 km or miles. If this value is exceeded, the total distance counter restarts at zero.
M2 WL Wireless transmission of the speed The VDO M2 WL comes with analogue wireless transmission. Note: LED front lights can interfere with analogue wireless transmission. The wireless range is approx. 75 cm between the transmitter on the fork and the computer/receiver on the handlebars.
STEP 2 90° – 45° Place the spoke magnet around an outside spoke. The VDO logo of the rod-shaped magnet core should point toward the ✔ transmitter. Align the magnet with the cross-hatched sensor marking on the transmitter at a distance of 1- 5 mm.
M2 WL Inserting the computer into the handlebar bracket The VDO twist-click system securely connects the computer to the handlebar bracket. Lock This occurs as follows: STEP 1 UNLock Place the computer into the bracket in a 10 o’clock position.
This can be seen from the flashing antenna icon. If you now set off cycling again, the auto-start function is used. The VDO M2 WL instantly switches back to the function mode. The current speed is once again displayed. This can take up to eight seconds.
If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any other settings, press and hold the SET button. The settings menu closes. The VDO M2 WL returns to function mode.
M2 WL Settings – wheel circumference You can set the roll circumference of your wheel on the VDO M2 WL. Wheel Wheel The more accurate this setting, the more accurate your speed circumference circumference Tyre size ETRTo in mm in inches indicator and the measurement of the distance you have 16 x 1.75...
Page 12
M2 WL Settings – wheel circumference How to set your wheel circumference: Press and hold the SET button until the settings menu opens. “Language” appears on the display. Press the BIKE button to scroll to the setting for the wheel circumference.
Page 13
If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any other settings, press and hold the SET button. The settings menu closes. The VDO M2 WL returns to function mode.
If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any other settings, press and hold the SET button. The settings menu closes. The VDO M2 WL returns to function mode.
M2 WL Settings – clock In the VDO M2 WL, you can set the time in 12-hour AM/PM format or 24-hour format. Press and hold the SET button until the settings menu opens. “Language” appears on the display. Press the BIKE button to scroll to the setting for the time.
Page 16
If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any further settings, press and hold the SET button. The settings menu closes. The VDO M2 WL returns to function mode.
Page 17
If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any other settings, press and hold the SET button. The settings menu closes. The VDO M2 WL returns to function mode.
If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any other settings, press and hold the SET button. The settings menu closes. The VDO M2 WL returns to function mode.
M2 WL Settings – setting the total distance You can set the total distance ridden on the VDO M2 WL. For example, you can enter your data here at the start of a new cycling season. ATTENTION: the M2 WL has a data memory.
M2 WL Settings – setting the total ride time You can set the total ride time on the VDO M2 WL. E.g. you can set your total ride time (total ride time for all trips) at the start of the new cycling season).
Page 21
If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any other settings, press and hold the SET button. The settings menu closes. The VDO M2 WL returns to function mode.
Resetting trip data after the trip After each day trip, you can reset the data for this day trip to zero. The VDO M2 WL is then ready for the next day trip. ATTENTION: your total distance (total number of kilometres ridden) and total ride time are not reset to ZERO.
M2 WL Low battery indicator The M2 WL has a low battery warning. The text “Computer low” appears on the display. Press the BIKE button to acknowledge this low battery warning. You can keep using the cycle computer for approx. a week. Replace the battery as soon as possible on seeing the low battery warning.
M2 WL Replacing the battery in the speed transmitter The battery in the speed transmitter should be replaced annually to guarantee seamless wireless transmission. You need a 3 V 2032 battery. We recommend using a branded battery from Sony, Panasonic, Varta or Duracell. The process is as follows: STEP 1 oPEN...
M2 WL Terms of guarantee VDO Cycle Parts offers a 2-year guarantee on your VDO If your complaint is legitimate, you will receive a comparable replacement device. You are not entitled to a replacement of computer, starting from date of purchase. This guarantee...
M2 WL Troubleshooting Error Possible cause Correction Half segments on the display Computer software not running Remove and re-insert the battery (e.g. after a battery change) correctly after battery change No speed displayed Distance from sensor to magnet too Correct the sensor and magnet positions great No speed displayed Computer not properly clicked...
Page 27
The declaration of conformity can be viewed at: Neustadt/Weinstraße, declare that when used as intended, www.vdocyclecomputing.com. the VDO cycle computers with wireless transmission VDO M2 WL and the A1 transmitter comply with the essential requirements established in Article 3 of the R&TTE Directive 1999/5/EC.