Selecting Timers; Setting Timers - VDO X3DW Instruction Manual

GB SLO PL JP
6. Timer functions
Your VDO computer has 7 different timing functions.
When one of the timing functions is running, the
symbol always flashes at the bottom left of the
display. You can only activate one timing function
from the 7 available at any one time. The setting/
measuring range for all timing functions is 0:00:00 h
to 24:00:00 h.
1. STOPWATCH
Manual stopwatch for measuring the ride time
for certain route sections.
2. TIMER 1
You can program a time, e.g. for interval training.
TIMER 1 counts forwards from zero. At the end of
TIMER 1 a single beep is heard. TIMER 1 starts again
until you stop it.
3. TIMER 2
You can program a time, e.g. for the rest period
during interval training. TIMER 2 counts forwards
from zero. At the end of TIMER 2 a double beep is
heard. TIMER 2 starts again until you stop it.
4. TIMER 1+2
With this function, first TIMER 1, then TIMER 2 run
alternately. At the end of TIMER 1 a single beep is
heard and TIMER 2 starts to run automatically.
At the end of TIMER 2 a double beep is heard.
TIMER 1+2 keeps running until you stop this function
or until the set number of repeats has expired.
22 X3DW
5. COUNTDOWN
You can program a time, and the timer counts back-
wards from this time. At the end of the
COUNTDOWN time a single beep is heard.
6. TIME TRIAL
On the TIME TRIAL timer, a distance can be set (time
trial distance). Whilst cycling, the expected ride
time, based on the average speed and the distance
still to be cycled, is constantly shown alternately on
the display.
7. LAP TIMER
The lap timer can store 30 laps.
For every lap, the following is saved:
Time
B
Distance
B
Average
B
The next lap can be started either manually or
automatically.
For the automatic start, a distance is preset. Once
this distance has been cycled, the next lap is started
automatically.
VDO CYCLECOMPUTING

6.1 Selecting timers

Using go to SETTINGS /
SELECT. Confirm with M . You are
now in setting mode (pressing
for 3 seconds gets you back to
C
function mode).
Using go to TIMER/ SELECT
Confirm with M .
Using select the timer
you want:
STOPWATCH
B
COUNTDOWN
B
TIMER 1
B
TIMER 2
B
TIMER 1+2
B
TIME TRIAL
B
LAP TIMER
B

6.2 Setting timers

Setting timer and countdown counters:
Using go to SETTINGS/
SELECT. Confirm with M . You are
now in setting mode
(pressing C for 3 seconds gets
you back to function mode).
www.vdocyclecomputing.com
JP PL SLO
When confirming the SELECT the timing function
last selected always appears.
Confirm with M .
Timer/SELECT OK? Confirm with M .
TIMER/SELECT DONE appears briefly and your
VDO computer automatically returns to the start
menu SETTINGS/ SELECT. The selected TIMING
function is now available in function mode.
Note: If you have selected the TIMER or COUNT-
DOWN or TIME TRIAL modes, but have not set
any time values or distance, the text „NO VALUE"
appears.
You then still have to enter the times or distances
for the selected timer in the menu TIMER SET.
Using go to TIMER/SET
Confirm with .
M
X3DW
GB
23