Sleep Mode; Reset Functions - VDO X3DW Instruction Manual

D GB F I
Access next digit with . Repeat steps until last
M
digit is flashing. Confirm with M .
NAVIGATOR/SET OK? Confirm with M .
NAVIGATOR/SET DONE appears as confirmation
and your VDO computer automatically returns to
the NAVIGATOR/SELECT menu.
Note: The navigator always runs automatically
at the same time, even if you have not set it.
Set navigator back to zero:
Using go to NAVIGATOR/
SELECT. Confirm with M .

5.8 Sleep mode

Your VDO computer is equipped with a two-fold
sleep mode function.
In sleep mode, a large part of the display is switched
off to save battery power. Time, service interval
display and the -symbol (if a timing function is
running) continue to be displayed.
Sleep mode 1 switches itself on after 5 minutes if
no speed impulses are processed and no button
is pressed.
Sleep mode 1 is ended when speed impulses
are processed again (when cycling) or a button
is pressed.
48 X3DW
NAVIGATOR/SET
Using switch to
NAVIGATOR/RESET.
Confirm with M .
Security question: NAVIGATOR/RESET?
Confirm with M .
NAVIGATOR/SET DONE appears briefly and your
VDO computer automatically returns to the NAVI-
GATOR/SELECT start menu.
In Sleep mode 2 the wireless receiver is also
switched off. (after 15 min).
The display shows SLEEP
MODE/PRESS BUTTON
Before continuing to ride,
you must press a button to
switch the receiver back on.
The display for the speed and
the cadence flashes.
VDO CYCLECOMPUTING
The computer now waits for speed and cadence
signals (as long as cadence is installed). Simply set
off riding now. The computer acquires the digital
encodings from the transmitter.

5.9 Reset functions

You use the RESET function to set any of these back
TOUR DATA
B
ODO TOTAL
B
TOT RIDE TM
B
NAVIGATOR
B
LAP DATA
B
With the respective reset modes, the following
information is deleted:
TOUR DATA: Day's tripdistance, ride time,
B
average speed, max. speed, cadence (option)
ODO TOTAL: Total km, km bike 1, km bike 2
B
TOTAL RIDE TM: Total ride time, ride time bike 1,
B
ride time bike 2.
NAVIGATOR: all values from the second
B
distance counter.
LAP DATA: All stored lap times, distances,
B
average lap values.
Using go to SETTINGS/
SELECT. Confirm with M .
You are now in setting mode
(pressing C for 3 seconds gets
you back to function mode).
www.vdocyclecomputing.com
I F GB
Using go to DATA RESET/
SELECT. Confirm with M .
Use to go to the data you
want to reset:
DATA RESET/TOUR DATA
B
DATA RESET/TOT RIDE TM
B
DATA RESET/ODO TOTAL
B
DATA RESET/LAP DATA
B
DATA RESET/NAVIGATOR
B
Confirm your selection with
Query: SELECTED DATA / RESET?
ATTENTION: This step cannot be reversed.
Only confirm with M , if you want to delete the
selected data. The display confirms:
DATA RESET/RESET DONE.
Automatic return to SETTINGS/SELECT.
X3DW
D
M .
49