Display - VDO X3DW Instruction Manual

D GB F I

1. Display

The display can be divided
into 5 sections:
Section 1
always shows
the current time.
Section 2
shows the current cadence,
if the cadence transmitter is
installed (optional).
You will also find
indicator elements
on the display
You can find the description
of the individual indicators
on the right hand side.
32 X3DW
Service indicator
shows that your bike should go for a service.
You can set the service interval individually for
bike 1 and bike 2.
Section 3
shows the Stopwatch indicator
current speed. shows that a timer is still running whilst you have
retrieved other information on the display.
Section 4 Indicator bike 1/bike 2
shows the value of the The computer can work with two different set-
display function/ tings for 2 bikes. The indicator shows which of the
information that you two bikes you have chosen to use.
selected. The total distances are accordingly counted and
stored separately for bike 1 and bike 2.
Section 5
shows the description of
the selected function in The computer can display both KHM and MPH.
the top line (info line). The Distances are shown in kilometres or miles
second line (menu line) accordingly.The indicator shows the selected
shows, measurement unit.
whether there is more
B
information „MORE"
whether there is
B
another selection
option „SELECT".
VDO CYCLECOMPUTING www.vdocyclecomputing.com
to speed (average)
The computer compares the current speed
with the average speed.
The indicator shows
B
B
B
When a submenu has been accessed, these indi-
cators flash and show that there are other selec-
tion options or that the computer is waiting for
an entry (setting mode).
Measurement unit (KMH or MPH)
Shows whether an alarm/wake-up time has
been set.
I F GB
Speed difference indicator (current)
whether the current speed is higher than
the average (+1 KMH)
below the average (-1 KMH)
or matches the average
(tolerance +/- 1 KMH).
Menu prompt indicator
Alarm indicator
X3DW
D
33