Optional Parts And Installation; Optional Parts And Installation For Ras-(2-3)Hvrn(1)(E)(S) - Hitachi RAS-5HVRNM1E Service Manual

2 Unit Installation

2.7 Optional parts and installation

2.7.1 Optional parts and installation for RAS-(2-3)HVRN(1)(E)(S)

¿
Air flow guide, wind guard and snow protection hood
Optional parts
Air flow guide
Wind guard
Zinc Plate
Snow protection
hood
Stainless plate
(NSSC180)
¿ Air flow guide
Model
Quantity
Air discharge
Upward (downward), left & right
direction
Material Weather proof polypropylene resin
Color
Weight
4x [M5 (SUS) x 12]+4x [M5 (SUS) x 30]
Accessories
Self-screw 2x [M4 x 13]
"Wind Guard" or "Snow protection hood" is not
Installation
available to install with air flow guide. ("Guard net" is
restriction
available to be installed together.)
Attaching example of air flow guide
• Attach the air flow guide to the air discharge grille with four (4) screws (supplied).
• The fixing holes are located at 4 positions on the grille. (Screw tightening torque 2.4 ~ 3.1 N.m)
• Do not remove the air discharge grille for air flow guide installation.
C A U T I O N
• If the air guide is installed without discharge grille, it may cause injury due to rotating fan.
28
SMGB0060 rev. 1- 12/2010
Air outlet
Air inlet of rear side
Air inlet of side face
Air outlet
Air inlet of rear side
Air inlet of side face
AG-264
1 per unit
Gray
1.4 kg
Fixing screw
Installation manual
HP Model
AG-264
2-3
WSP-264
ASG-NP80F
2-3 ASG-NP56B
ASG-NP56L
ASG-NP80FS2
ASG-NP63B52
2-3
ASG-NP63LS2
1
2
3
1
1
1
Mounting dimension
2
Air flow guide
1 2
3
Air flow guide
Wind Guard
Snow protection hood
2