Hitachi RAS-5HVRNM1E Service Manual page 52

2 Unit Installation
3 Air flow guide
4 Passage side
¿ Wind guard
Specifications
Model
Quantity
Material
Color
Weight
Accessories
Installation restriction
Attaching example of air wind guard
• Attach the air flow guide to the air discharge grille with four (4) screws (supplied).
• The fixing holes are located at 4 positions on the grille. (Screw tightening torque 2.4 ~ 3.1 N.m)
• Do not remove the air discharge grille for air flow guide installation.
C A U T I O N
• If the air guide is installed without discharge grille, it may cause injury due to rotating fan.
Two windguard covers installation
1 Air discharge grille
2 Wind guard
3 Outdoor unit
4 M5 fixing screw x4 (Accessories)
44
SMGB0060 rev. 1- 12/2010
WSP-335A
2 per unit
Galvanized sheet metal +
baked painting
Gray (1.0Y8.5/0.5)
5.5 kg
Fixing screw x 4
[M5 (SUS) x 12]
Installation manual
"Guard net", "Air flow guide" or "Snow
protection hood" is not available to
install with Wind guard
1
2
2
1
2
1
Mounting dimension
2
Air flow
2
2
1
3
2
3
1
4