Optional Parts And Installation For Ras-(2-2.5)Hvnp1 / Ras-3Hvnc1; Air Flow Guide Wind Guard And Snow Protection Hood; Air Flow Guide - Hitachi RAS-(3-6)HVNC1(E) Service Manual

2 Unit Installation
2.7 Optional parts and installation
2.7.1 Optional parts and installation for RAS-(2-2.5)HVNP1 / RAS-3HVNC1
  
Air flow guide wind guard and snow protection hood
Optional parts

Air flow guide

Wind guard
Zinc Plate
Snow protection
hood
Stainless plate
(NSSC180)
  
Air flow guide
Model
Quantity 1 per unit
Air discharge
Upward (downward) left & right
direction
Material Weather proof polypropylene resin
Color Gray
Weight 1.4 kg
Fixing screw
4x [M5 (SUS) x 12]+4x [M5 (SUS) x 30]
Accessories Installation manual
Self-screw 2x [M4 x 13]
"Wind Guard" or "Snow protection hood" is not
Installation
available to install with air flow guide. ("Guard
restriction
net" is available to be installed together.)
Attaching example of air flow guide
• Attach the air flow guide to the air discharge grille with four (4) screws (supplied).
• The fixing holes are located at 4 positions on the grille. (Screw tightening torque 2.4 3.1 N.m)
• Do not remove the air discharge grille for air flow guide installation.
C A U T I O N
If the air guide is installed without discharge grille it may cause injury due to rotating fan.
32
SMGB0087 rev.0 - 12/2013
Air outlet
Air inlet of rear side
Air inlet of side face
Air outlet
Air inlet of rear side
Air inlet of side face
AG-264
1
2
Model
AG-264
WSP-264
ASG-NP80F
ASG-NP56B
ASG-NP56L
ASG-NP80FS2
ASG-NP63B52
ASG-NP63LS2
1
Air flow guide
2
Wind Guard
3
Snow protection hood
1
1
Mounting dimension
Air flow guide
2