Combination Switch; Turn Signal Lamps; High-Beam Headlamps And High-Beam Flasher - Mercedes-Benz Sprinter Operating Instructions Manual

Exterior lighting
94
If your vehicle is only equipped with one
i
rear fog lamp, you must turn the light
switch to L.
When the light switch is set to à you
i
cannot switch on the front and rear fog-
lamps.
To switch on the front fog lamps: pull the
X
light switch out to the first locking point.
The green N indicator lamp on the light
switch lights up.
To switch on the rear fog lamp: pull the
X
light switch out to the second locking point.
The yellow R indicator lamp on the light
switch lights up.
To switch off the front and rear fog-
X
lamps: push in the light switch to the stop.
The R and N indicator lamp on the
light switch go out.

Combination switch

Turn signal lamps

To indicate a right turn
:
To indicate a left turn
;
To indicate: press the combination switch
X
in desired direction : or ; until it
engages.
The combination switch automatically
returns to its original position after large
steering movements.
To indicate briefly: press the combination
X
switch briefly in desired direction : or ;.
The corresponding turn signal flashes three
times.
High-beam headlamps and high-beam
flasher
High-beam headlamps
:
High-beam flasher
;
To switch on the high-beam headlamps:
X
switch on the low-beam headlamps
( page 92).
Y
Press combination switch : forwards.
X
The K indicator lamp in the instrument
cluster lights up.
In the à position, the high-beam head-
i
lamps are only switched on when it is dark
and the engine is running.
To switch off the high-beam headlamps:
X
move the combination switch back to its
normal position.
The K indicator lamp in the instrument
cluster goes out.
To switch on the high-beam flasher: turn
X
the key to position 1 or 2 in the ignition
lock.
Pull the combination switch briefly in direc-
X
tion of arrow ;.