Rear Bulbs (Cargo Van/Passenger Van) - Mercedes-Benz Sprinter Operating Instructions Manual

Changing bulbs
102
Turn signal lamps
Switch off the lighting system.
X
Open the hood (
X
Y
Turn bulb holder : counter-clockwise and
X
remove it.
Applying light pressure to the bulb, turn it
X
counter-clockwise and remove it from bulb
holder :.
Press the new bulb into bulb holder : and
X
screw it in clockwise.
Insert bulb holder : into the lamp and turn
X
it clockwise to tighten.
Close the hood.
X
Additional turn signal lamp (all-wheel-
drive vehicles)
Additional turn signals (example: Cargo Van and
Passenger Van)
The additional turn signals are mounted on
the side of the vehicle's front wings.
Switch off the lighting system.
X
Undo screws : and remove lamp lens ;.
X
page 252).
Applying light pressure to the bulb, turn it
X
counter-clockwise and remove it from the
bulb holder.
Press the new bulb into the bulb holder and
X
screw it in clockwise.
Position lamp lens ; and tighten
X
screws :.
Rear bulbs (Cargo Van/Passenger
Van)
Overview of bulb types
Lights
High-mounted brake
:
lamp
Brake lamp/tail lamp
;
Turn signal lamps
=
Tail lamps/standing
?
lamps
License plate lamp
A
Bulb type
LED
P21W/5W
PY 21 W
R5W
W5W