Low Range Transmission Ratio; Engaging/Disengaging All-Wheel Drive - Mercedes-Benz Sprinter Operating Instructions Manual

Hide thumbs Also See for Sprinter:
Table of Contents

Advertisement

get the full benefit from the all-wheel drive
system.
For information on "Driving off-road", see
(
page 157).
Y
Engaging all-wheel drive
Conditions for engaging/disengaging
All-wheel drive can only be engaged or disen-
gaged if:
the engine is running
R
the vehicle is stationary
R
If it is not possible to engage all-wheel-drive:
move the selector lever to position N
R
release the brake pedal
R
press the ; button
R
move the selector lever from N to D or R
R

Engaging/disengaging all-wheel drive

To engage/disengage: press the ;
X
button.
The indicator lamp in the ; button
flashes. The h and : indicator
lamps light up in the instrument cluster.
ESP
®
and ASR are deactivated for the dura-
tion of the engaging/disengaging process.
If the engaging/disengaging process is
successful, the h and : indicator
lamps in the instrument cluster go out and
®
ESP
and ASR are reactivated.
If the indicator lamp in the ; button is
lit, all-wheel drive is engaged. On vehicles
with steering-wheel buttons, the display
Driving systems
then shows the following message:
wheel drive
active.
If the engaging/disengaging process fails,
the indicator lamp in the ; button
flashes three times briefly. One of the gear
change conditions was not fulfilled.
As long as the indicator lamp in the ;
button is flashing, you can cancel the engag-
ing/disengaging process by pressing
the ; again.
If the LOW RANGE transmission ratio
i
(
page 169) is engaged, all-wheel drive
Y
cannot be disengaged.

LOW RANGE transmission ratio

General notes
The LOW RANGE transmission ratio assists
you when driving on difficult terrain. If you
engage LOW RANGE, the engine's perform-
ance characteristics and the automatic trans-
mission's shifting characteristics are adjus-
ted accordingly. The transmission ratio from
the engine to the wheels is around 40% lower
than in the on-road position. This increases
the drive torque.
Conditions for engaging/disengaging
LOW RANGE can only be engaged or disen-
gaged if:
the engine is running
R
the vehicle is stationary
R
the brake pedal is depressed
R
the selector lever of the automatic trans-
R
mission is in position P or N
all-wheel drive is engaged
R
169
Four-
Z

Advertisement

Table of Contents
loading

Table of Contents